Retraining ReportJob training public funding can pay for

Find training

Heavy equipment operator training in New Mexico

12 heavy equipment operator programs with costs, results and funding that can make them free

4 schools offer these heavy equipment operator programs, and New Mexico has approved every one for workforce funding. Each shows its price if you pay yourself and how past students did. One school runs 7 of these 12 programs, so the typical figures lean heavily on its prices and results.

Heavy equipment operators drive and control the machines that build roads, bridges and buildings. Most have a high school diploma and learn on the job or in a three- or four-year apprenticeship, and many need a commercial driver's license to haul their equipment between jobsites.1

In New Mexico, 6 of the 12 programs take students without a high school diploma and 6 ask for a diploma or equivalent.

By kind, the 12 programs here are single machine course (7 programs), heavy equipment operator course (4 programs) and heavy equipment with CDL (1 program).

See the 12 programs

How much does heavy equipment operator training cost in New Mexico?

$5,504 to $7,325 is what most heavy equipment operator programs in New Mexico cost if you pay yourself

That is the middle half of the 12 programs with a price. All of them: $2,215 to $12,556

In the typical program

Finished the program
Left out
7 in 10 of New Mexico's programs report exactly 100%, far more than in other states
Working 6 months later
Not enough data
1 program reports it; a typical figure needs 5
Earned a year, estimated
Not enough data
1 program reports it; a typical figure needs 5
Length
5 to 16 weeks

Source: US Department of Labor, program year 2024 (July 2024 to June 2025). Only programs approved for workforce funding are listed; other schools in New Mexico may also offer heavy equipment operator training. How these figures are made

Is there free heavy equipment operator training in New Mexico?

Who qualifies, and other ways to pay: financial aid, grants and the GI Bill

All 12 heavy equipment operator programs in New Mexico approved for WIOA funding

Filters
What you need to enroll
Kind of program
How it's taught
How to show the list

12 programs

  • Single machine courseHybridNo diploma needed

    Construction/Heavy Equipment Training & Certification - Excavator

    Safety Zone Credentialing

    Sapello

    No diploma needed

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · No diploma needed

    Earned a year, estimated$30,900
    Price if you pay yourself$6,235
    More details about Construction/Heavy Equipment Training & Certification - Excavator at Safety Zone Credentialing
    Finished
    Left out
    Working at 6 months
    52%
    Earned in a quarter
    $7,726
    Length
    16 weeks, 18 hours a week
    Cost of supplies
    $1,035
    Students counted
    24
    Earned a year, estimated
    $30,900
    Price if you pay yourself
    $6,235

  • Heavy equipment with CDLIn personNo diploma needed

    Combination Course (Professional Truck Driving and Heavy Equipment Operator)

    Mountain View Vocational Institute

    El Paso, TX

    No diploma needed

    Mountain View Vocational Institute, El Paso, TXHeavy equipment with CDLIn person · No diploma needed

    Classes are outside New Mexico; New Mexico approved the program for its funding.

    Earned a year, estimatedNot reported
    Price if you pay yourself$10,000
    Program website, Combination Course (Professional Truck Driving and Heavy Equipment Operator) at Mountain View Vocational Institute
    More details about Combination Course (Professional Truck Driving and Heavy Equipment Operator) at Mountain View Vocational Institute
    Finished
    Left out
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    10 weeks, 40 hours a week
    Cost of supplies
    None listed
    Students counted
    117
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $10,000
    Program website, Combination Course (Professional Truck Driving and Heavy Equipment Operator) at Mountain View Vocational Institute

  • Single machine courseHybridNo diploma needed

    Construction/ Heavy Equipment Certification - Dozer

    Safety Zone Credentialing

    Sapello

    No diploma needed

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$2,215
    More details about Construction/ Heavy Equipment Certification - Dozer at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    1 week, 40 hours a week
    Cost of supplies
    $2,035
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $2,215

  • Single machine courseHybridHigh school diploma or equivalent

    Construction/Heavy Equipment Training & Certification - Loader

    Safety Zone Credentialing

    Sapello

    High school diploma or equivalent

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$3,755
    More details about Construction/Heavy Equipment Training & Certification - Loader at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 13 hours a week
    Cost of supplies
    $2,035
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $3,755

  • Heavy equipment operator courseOnlineHigh school diploma or equivalent

    Intro to Heavy Equipment Tutorial

    Southwest Indian Foundation

    Based in Gallup, NM

    High school diploma or equivalent

    Southwest Indian Foundation, based in Gallup, NMHeavy equipment operator courseOnline · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$5,500
    More details about Intro to Heavy Equipment Tutorial at Southwest Indian Foundation
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    4 weeks, 40 hours a week
    Cost of supplies
    $3,000
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $5,500

  • Single machine courseHybridHigh school diploma or equivalent

    Construction/Heavy Equipment Training & Certification - Dozer

    Safety Zone Credentialing

    Sapello

    High school diploma or equivalent

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$5,505
    More details about Construction/Heavy Equipment Training & Certification - Dozer at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 14 hours a week
    Cost of supplies
    $1,535
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $5,505

  • Single machine courseHybridHigh school diploma or equivalent

    Construction/Heavy Equipment-Training & Certification-Backhoe

    Safety Zone Credentialing

    Sapello

    High school diploma or equivalent

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$5,505
    More details about Construction/Heavy Equipment-Training & Certification-Backhoe at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 14 hours a week
    Cost of supplies
    $1,535
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $5,505

  • Single machine courseHybridHigh school diploma or equivalent

    Construction/Heavy Equipment - Training and Certification - Motor Grader

    Safety Zone Credentialing

    Sapello

    High school diploma or equivalent

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,265
    More details about Construction/Heavy Equipment - Training and Certification - Motor Grader at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 18 hours a week
    Cost of supplies
    $1,035
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $6,265

  • Single machine courseHybridHigh school diploma or equivalent

    Construction/Heavy Equipment Training and Certification-Backhoe & Excavator

    Safety Zone Credentialing

    Sapello

    High school diploma or equivalent

    Safety Zone Credentialing, SapelloSingle machine courseHybrid · High school diploma or equivalent

    Earned a year, estimatedNot reported
    Price if you pay yourself$6,340
    More details about Construction/Heavy Equipment Training and Certification-Backhoe & Excavator at Safety Zone Credentialing
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    16 weeks, 16 hours a week
    Cost of supplies
    $1,060
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $6,340

  • Heavy equipment operator courseIn personNo diploma needed

    Heavy Equipment Operator I

    Mountain View Vocational Institute

    El Paso, TX

    No diploma needed

    Mountain View Vocational Institute, El Paso, TXHeavy equipment operator courseIn person · No diploma needed

    Classes are outside New Mexico; New Mexico approved the program for its funding.

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,325
    Program website, Heavy Equipment Operator I at Mountain View Vocational Institute
    More details about Heavy Equipment Operator I at Mountain View Vocational Institute
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    5 weeks, 40 hours a week
    Cost of supplies
    $1,538
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $7,325
    Program website, Heavy Equipment Operator I at Mountain View Vocational Institute

  • Heavy equipment operator courseIn personNo diploma needed

    Heavy Equipment Operator II

    Mountain View Vocational Institute

    El Paso, TX

    No diploma needed

    Mountain View Vocational Institute, El Paso, TXHeavy equipment operator courseIn person · No diploma needed

    Classes are outside New Mexico; New Mexico approved the program for its funding.

    Earned a year, estimatedNot reported
    Price if you pay yourself$7,325
    Program website, Heavy Equipment Operator II at Mountain View Vocational Institute
    More details about Heavy Equipment Operator II at Mountain View Vocational Institute
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    5 weeks, 40 hours a week
    Cost of supplies
    $1,568
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $7,325
    Program website, Heavy Equipment Operator II at Mountain View Vocational Institute

  • Heavy equipment operator courseIn personNo diploma needed

    Heavy Equipment Operator

    Glitz Inc.

    Las Cruces

    No diploma needed

    Glitz Inc., Las CrucesHeavy equipment operator courseIn person · No diploma needed

    Earned a year, estimatedNot reported
    Price if you pay yourself$12,556
    More details about Heavy Equipment Operator at Glitz Inc.
    Finished
    Not reported
    Working at 6 months
    Not reported
    Earned in a quarter
    Not reported
    Length
    8 weeks, 40 hours a week
    Cost of supplies
    $1,144
    Students counted
    Not reported
    Earned a year, estimated
    Not reported
    Price if you pay yourself
    $12,556

How to pay for heavy equipment operator training in New Mexico

WIOA funding can pay for heavy equipment operator training in New Mexico

Every program on this page is approved for it. Whether you qualify, how much your local area pays and how to apply are on our page Does WIOA pay for job training?

Financial aid and grants for heavy equipment operator training

Most students can get federal student aid for college, career school or trade school. A Federal Pell Grant, unlike a loan, usually doesn't have to be repaid. Ask the school whether its program qualifies.67

GI Bill for heavy equipment operator training

Veterans, service members and qualified dependents can use GI Bill benefits for non-college training programs.8

The program list does not show which programs accept these. Ask the school.

Quick facts: Heavy equipment operator training in New Mexico

lowest typical price among the states with enough programs to compare
6th of 12
heavy equipment operator programs here, against the typical state's 4
12 vs 4

State comparisons use the same figures as the heavy equipment operator training by state table: the middle program of each state, and only states with three or more schools for prices. Source: US Department of Labor, program year 2024 (July 2024 to June 2025).

Heavy equipment operator training in Las Vegas, El Paso, Las Cruces and other New Mexico cities

Choosing an area filters the program list above. 1 program is online.

Other training in New Mexico

How heavy equipment operator training compares with the rest of skilled trades: Trade school programs in New Mexico

Where the New Mexico heavy equipment operator program numbers come from

Which New Mexico heavy equipment operator programs are on this list?

These are the heavy equipment operator programs New Mexico approved for WIOA funding (public workforce funding under the Workforce Innovation and Opportunity Act), as reported to the US Department of Labor for program year 2024 (July 2024 to June 2025). Each state keeps its approved programs on an eligible training provider list (ETPL).9 The list here covers programs approved as of June 30, 2025. Schools that never applied for approval are missing, so this is a part of what New Mexico offers.

How the prices and results of New Mexico heavy equipment operator programs are measured

Prices are tuition and required fees for someone paying without workforce funding, as the school reported them; check the current price with the school. Results describe students who left each program in recent years, so they are no guarantee, and the yearly earnings are the reported quarter times four, an estimate. A program without a "Trained with WIOA funding" line may still take WIOA students. Where a field was left empty or withheld, the page says "Not reported", and "Left out" where a figure was filed but failed one of our checks; nothing is estimated to fill a gap. Where the numbers come from explains each figure in full.

How reliable are the New Mexico figures?

We leave out the share who finished for New Mexico: 7 in 10 of its programs report exactly 100%, far more than in other states.

Sources for the facts about heavy equipment operator training in New Mexico

Show the 9 sourcesHide the sources
  1. US Bureau of Labor Statistics, Occupational Outlook Handbook: Construction Equipment Operators
  2. US Department of Labor, TrainingProviderResults.gov: About This Site
  3. US Department of Labor: WIOA Adult Program
  4. Code of Federal Regulations, title 20, part 680, sections 680.220, 680.230 and 680.310: career services before training, other grants such as Pell Grants first, and limits on Individual Training Accounts (GovInfo, 2024 edition)
  5. US Department of Labor: American Job Centers
  6. US Department of Education, Federal Student Aid: Eligibility for Federal Student Aid
  7. US Department of Education, Federal Student Aid: Don't Miss Out on Federal Pell Grants
  8. US Department of Veterans Affairs: GI Bill benefits for non-college degree programs
  9. US Department of Labor, Training and Employment Guidance Letter 8-19, Attachment I: Requirements for Training Providers, Program Eligibility, and the State Eligible Training Provider (ETP) List